Login Fathom™ Control and select the correct venue.
Set Hub Position
Click the "Devices" tab and use the "Filters" field and enter "hub" to display a list of Fathom™ Hubs, click the gear button besides the Fathom Hub of interest. Alternatively, the Fathom Hub serial number can be used in the "Filters" field.
In the Fathom Hub Settings pop-up enable "Override Position". Use the map below and drag the Fathom Hub icon to the correct location. If you have the latitude and longitude values for the location of the hub, click "Manual" and enter these values.
Set Hub Orientation
Scroll down to the Fathom Hub Settings pop-up and enable "Override Orientation". The hexagonal dot represents the LED of the Fathom Hub. Using the slider to rotate the Fathom Hub icon to match the direction the LED of the Fathom Hub is pointed at.
If the orientation override value is known, click the number field to input the value.
NOTE: There is no need to factor in if the Hub is installed top-up or top-down. This information was supplied when claiming the hubs.